Under shock or impact loading, the load capacity of the pads should be reduced by 50%. cm.) and are typically used with equipment or machinery having lowest operating speeds of 3600 rpm. Kinetics Model RSP elastomer in-shear isolation pads are suitable for the isolation of noise, shock, and high frequency vibration produced by mechanical, industrial, or process equipment located on grade, structural slab, or in other noncritical areas.Īpplications for Model RSP pads should be limited to pad loadings not to exceed 60 lb. RSP pads are available in 18" x 18" x 3/4" (457 mm x 457 mm x 19 mm) thick sheets and are pre-scored into 2" x 2" (51 mm x 51 mm) squares. The elastomer is oil and water resistant, offers a long life expectancy consistent with neoprene compounds, and has been designed to operate within the safe stress limits of the material. Several layers of RSP pads can be stacked for additional deflection when steel separation shim stock is used. Pads are designed for a maximum deflection of approximately 20% of its unloaded thickness, 0.15" (0.38 cm). Pads are 50 durometer and are designed for a maximum of 60 psi (4.2 kg. Kinetics RSP neoprene pads are produced from a high quality neoprene elastomer.
0 Comments
Leave a Reply. |